FILTER PRESS ACCESSORIES

."0" RING GASKETING
EDPM rubber "0" ring gasket for caulked, gasketed, recessed chamber plates.  Available in 100-foot spools.  We can also supply Viton and Buna Gasketing.  Please specify plate size when ordering.

CAKE REMOVAL SPATULAS
All-plastic spatulas are used to dislodge sludge cake from filter cloths . . . and minimizes damage to cloths.   

• 13 1/2" long spatulas are suitable for plates up to 800 mm
• 40" long are available for larger plates.

CAULKING HAMMERS
Reduces fatigue and potential injuries when installing CGR cloths.  These "dead-blow" caulking hammers have a shot-filled hollow head - reducing shock at the point of impact, and to wrists and elbows.  One-piece cast design, with soft face. 

AIR HAMMERS
Albax recommends the use of an Air Hammer for larger filter press plates (1000mm and above) or presses with more than 20 plates. The Air Hammer installs new filter cloths and gasket material fast and easy cutting installation times by 70%.  Designed to replace the "Hammer and Wedge" method for filter presses, the Air Hammer will pay for itself the first time you use it.

SLUDGE BAG SKID KIT™

The Sludge Bag filling station holds the Albax UN Certified Sludge Bag open during fill operations.  The Skid Kit™ features a low cost and simple installation, using your existing pallets for in-plant transfer.  The Skid Kit™ consists of 4, floor mounted PVC pipe-stands located out-board of your standard 36" wide pallets.  The pipe-stands retain the lifting slings of the Sludge Disposal Bag, keeping the bag open for filling.  When full, the bag is closed and can be moved either by the pallet or by the lifting slings. 

(does not include pallet or floor fasteners)